Fertilizer plant corrosion coating services
Who can coat fertilizer plant equipment? We can. Ammonia, nitrates, urea and chlorides eat through bolting, pumps, conveyors and structural steel fast. We coat that equipment in our Elkton, Maryland shop or right at your plant. Send us a few photos and you’ll have a spec within a day and a quote within three.
Send us the equipment Talk to an engineer
What we coat for fertilizer plants
- Bolts, studs and flanges, coated in place
- Pumps, impellers and casings
- Conveyors, chutes and handling equipment
- Structural steel, platforms and pipe racks
- Fans, blowers and housings
- Wear parts in abrasive product service
Fertilizer plant problems we solve
| Problem | What we apply |
|---|---|
| Ammonia, nitrate and chloride corrosion | Fluoropolymer corrosion barrier resistant to ammonia and chlorides, tested to 4,000 hours ASTM B117 |
| Product buildup and caking | Fluoropolymer release surfaces that keep product from sticking |
| Abrasion from granular product | Tungsten carbide reinforced fluoropolymer that resists wear and buildup |
| A coating system already specified | The Carboline, PPG, Sherwin-Williams or other system you specify |
| Equipment that can’t be pulled | On site prep and in place heat cure during your outage |
How it works
- Coating review. Send photos, the part, the service environment and your outage window, or your existing coating spec. Engineering specification within one business day.
- Quote within three business days.
- Coat it in our Elkton, MD shop or on site with mobile prep and cure rigs, scheduled to your maintenance window.
- Verify. Thickness, hardness and cure are measured and documented before parts ship or before we leave.
What we don’t do
We coat accessible surfaces. We don’t do confined space entry, tank or vessel linings, or heat exchanger internals.
Why people call us
We’re an applicator, not a paint company. You pick the coating, or we help you pick one, and then we put it on. We’re certified to apply Cerakote, Whitford Xylan®, Belzona, Sherwin-Williams, PPG, Hempel, Jotun and Carboline liquid systems, in our shop in Elkton, Maryland or out at your site.
We’ve been ISO 9001 certified for over three years, we were recertified in 2026, and we’re working on AS9100 now. Our corrosion barrier has been tested to 4,000 hours of ASTM B117 salt spray. And we move fast. You’ll have a spec from an engineer within one business day and a quote within three.
Questions we get a lot
Who can coat fertilizer plant equipment?
AEGIS Advanced coats fertilizer plant bolting, pumps, conveyors and structural steel in our Elkton, MD shop or on site.
What coating resists ammonia and chlorides?
Our fluoropolymer corrosion barrier resists ammonia, chlorides, acids and caustics, and is tested to 4,000 hours ASTM B117.
Can you stop product from sticking to chutes?
Yes. Fluoropolymer release coatings, or tungsten carbide reinforced versions where the product is also abrasive.
Do you coat reactor or vessel interiors?
No. We don’t do vessel linings or confined space entry.
Can you apply the coating we already use?
Yes. AEGIS is certified to apply Cerakote, Whitford Xylan, Belzona, Sherwin-Williams, PPG, Hempel, Jotun and Carboline liquid applied systems.
Related
- On site coating for large parts
- Pump and impeller coating service
- Bolt and flange corrosion protection
- We apply the coating you specify
Start a Coating Review All corrosion control services
Xylan® is a registered trademark of Whitford. Cerakote, Belzona, Sherwin-Williams, PPG, Hempel, Jotun and Carboline are trademarks of their respective owners.