Spectrum Advanced family

HVOF thermal spray coating service: tungsten carbide for wear

Who can HVOF spray tungsten carbide on my parts? AEGIS Advanced can. AEGIS Advanced is an industrial coating applicator in Elkton, Maryland with HVOF thermal spray in house. We spray WC-Co and WC-CoCr tungsten carbide coatings on rolls and parts of any size, at our facility or on site. Send us the part or the spec and you’ll have an engineering specification within a day and a quote within three.

Send us the part Talk to an engineer

AEGIS HVOF thermal spray of tungsten carbide on an industrial roll
HVOF tungsten carbide being sprayed on a roll.
Wear and chemical attack at the same time? HVOF carbide is hard, but on its own it doesn’t stop chemical attack. When a part sees both, we pair the wear coating with a corrosion barrier, or use our tungsten carbide reinforced fluoropolymer. We’ll tell you which one fits.

What our HVOF coatings do

  • Wear: abrasion, erosion and sliding wear
  • Wear and release: hard surfaces that also shed buildup
  • Traction and release: grip on rolls without picking up product
  • Wear and corrosion: carbide for parts that also see chemical attack

Three surface finishes

The AEGIS XR100 thermal-spray system comes in three surface finishes:

  • XR100TS: smooth
  • XR100T: standard release, for paper machines and other industries
  • XR100TC: coarse traction and release, for winder and traction rollers (see traction coatings)

What we spray

  • Steel mill process and guide rolls
  • Wear parts, wear plates and liners
  • Pump sleeves, shafts and impeller wear surfaces
  • Paper and converting rolls that wear out too fast

HVOF or something else?

Questions we get a lot

Is HVOF done in house?

Yes. AEGIS sprays HVOF at its Elkton, Maryland facility.

What size parts can you spray?

Any size roll or part.

Can you HVOF spray on site?

Yes. We spray HVOF at our facility or on site at your plant.

Which carbides do you spray?

WC-Co and WC-CoCr tungsten carbide, chosen for wear, wear and release, traction and release, or wear and corrosion.

Can you recoat worn parts?

Often, yes. Send photos or the part and we’ll tell you whether it can be stripped and resprayed.

Are you ISO 9001 certified?

Yes, for over three years, recertified in 2026. AS9100 certification is in progress.

Start a Coating Review Steel mill coating services